-
Product Center
-
-
-
Unmanaged Industrial Switches(Extended Temp)
Unmanaged Industrial Switch
L2 Managed Industrial Switches
L3 Managed Industrial Switches
TSN Industrial Switch
Managed Industrial PoE Switch
M12 Industrial Switch
Industrial 100-Mbps Transceiver
Industrial Gigabit Transceiver
Unmanaged Switch
L2 Managed Switches
Standard PoE Switches
Non-standard PoE Switches
Managed PoE Switch
Unmanaged Domestic Switches
Managed Domestic Switches
Unmanaged Waterproof Switches
Managed Waterproof Switches
100M Fiber Optic Transceivers
Gigabit Fiber Optic Transceivers
Fiber Optic Transceiver Chassis
Pure Telephone Optical Terminals
Telephone&Ethernet Optical Terminals
Integrated Service Telephone Optical Terminals
HDMI Video Optical Terminals
SDI Video Optical Terminals
VGA Video Optical Terminals
DVI Video Optical Terminals
3.5mm Interface Audio Optical Terminals
RCA Interface Audio Optical Terminals
XLR Interface Audio Optical Terminals
Commercial-grade Dry Contact Optical Terminals
Industrial-grade Dry Contact Optical Terminals
RS485 Date Optical Terminals
E1 Over IP
Voier Over IP
Pure E1 Optical Terminals
1+1 Fiber Back-up Optical Terminals
4~30 Channels PCM Multiplexers
Ethenet Over 1~16*E1 Converters
1~32 Serial Port Servers
Industrial 4G Routers
Industrial 5G Routers
2.4G/5.8G Wireless Bridge
Wireless AC Controller
Gigabit Optical Modules
Power Adapter
Rail-Mounted Power Supply
Fiber Optic Pigtail
Terminal Box
GQ-HDMI01V1A1R1D-1.4
1 HDMI channel (4K@30Hz) with loop-out; 1 forward 3.5mm audio channel with audio embedding and de-embedding; 1 reverse 3.5mm audio channel; 1 reverse IR channel; and 1 bidirectional RS-232/RS-485 optical transceiver.
Keywords
Commercial Switches
Domestic Switches
隐藏域元素占位
Category:
Commercial Switches
Domestic Switches
Product Overview
The HDMI 1.4 video optical transceiver incorporates the strengths of comparable products from both domestic and international markets, while aligning with real-world market demands. It leverages a single‑fiber link to transmit a 4K/30Hz HDMI video signal, along with one forward‑channel 3.5mm audio channel (with embedded/demultiplexed audio), one independent reverse‑channel 3.5mm audio channel, one reverse‑channel IR signal, and one bidirectional RS‑232/RS‑485 data channel—delivering lossless, uncompressed, high‑quality signal extension up to 10 kilometers with zero latency.
The HDMI 1.4 video optical transceiver employs imported components for both its optical module and core circuitry, ensuring stable performance. Featuring an integrated‑circuit design, it is compact and easy to install and commission, requiring no maintenance. Moreover, by utilizing optical fiber as the transmission medium, it delivers exceptional performance, with superior resistance to high temperatures and extreme cold, while effectively mitigating interference from strong electromagnetic radiation, lightning surges, and power‑line spikes, thereby significantly enhancing its stability and reliability.
Product Features
1. Complies with the HDMI 1.4 specification and supports 4K at 30 Hz, with backward compatibility.
2. Supports RGB and YUV 4:4:4/4:2:2/4:2:0 video formats.
3. Built-in EDID for automatic signal source and display device matching.
4. Supports bidirectional RS232/RS485 serial data passthrough (choose one).
5. The optical port supports multimode or single-mode, and can be configured with either a single-fiber or dual-fiber LC connector.
6. LED status indicator, enabling monitoring of the device’s operating condition.
7. Supports a power plug with a locking mechanism to prevent it from coming loose during operation.
8. Plug and play—no configuration required.
| Interface parameters | |
| Video interface | HDMI Specification: HDMI 1.4 Video bandwidth: 10 Gbps Video resolution: 480i ~ 1080p @ 50/60 Hz, 4K x 2K @ 24/30 Hz Color space: RGB, YCbCr 4:4:4 / 4:2:2, YUV 4:2:0 Maximum pixel clock: 297 MHz Recommended cable length: ≤10 m |
| Optical interface | Optical wavelengths: 850 nm, 1310 nm, 1550 nm Rate: 10 Gbps Optical transmit power: > -3 dBm Receiving sensitivity: < -10 dBm |
| Audio interface | Sampling frequency: 48 kHz Sampling depth: 24-bit Dynamic bandwidth: 96 dB Total Harmonic Distortion (THD): -88 dB Signal-to-Noise Ratio (SNR): 96 dB Audio input/output impedance: 600Ω Signal level: VPP 3.5V Signal Type: Stereo Channel |
| Data Interface | Communication Standards: Compliant with EIA RS-232 and RS-485 standards. Baud rate: adaptive from 0 to 115.2 kbps RS232: 3-wire configuration (RXD, TXD, GND), full-duplex, point-to-point communication RS485: Two-wire (positive, negative), half-duplex, point-to-multipoint master-slave communication. |
| IR interface | Infrared frequency: Standard configuration 20–60 kHz Signal Type: Digital Signal Infrared transmission direction: reverse transmission |
| Number of interfaces | |
| Optical port | Quantity: 1 piece Interface type: LC Transmission distance: Multimode fiber: 300 m; Single-mode fiber: 10/20/40/60/80 km |
| Video interface | Video channels: 1 channel Interface type: HDMI female connector |
| Data Interface | Quantity: 1 channel Interface type: Industrial terminal block |
| Audio interface | Quantity: 1-way forward 3.5mm audio with add/drop functionality + 1-way reverse independent 3.5mm audio Interface type: 3.5 mm stereo audio jack |
| IR interface | Quantity: 1 channel Interface type: Standard 3.5mm jack |
| Power Supply Characteristics | |
| Input voltage | DC12V |
| Full-load power consumption | <2W |
| Wiring method | DC5525 power connector with lock |
| Overload protection | Support |
| Work environment | |
| Operating temperature | -20～70℃ |
| Storage temperature | -40～85℃ |
| Relative humidity | 5% to 95% (non-condensing) |
| Mechanical Properties | |
| Shell | Metal casing |
| Installation Method | Desktop-style |
| Warranty | |
| Warranty period | Two years |
Device model | Business Interface | Optical port | Power supply |
GQ-HDMI01V1A1R1DA-1.4 | 1 HDMI port (4K at 30 Hz) with loop-out; 1 forward 3.5 mm audio port with audio de-embedding; 1 reverse 3.5 mm audio port; 1 reverse IR port; and 1 bidirectional RS‑232 port. | 1 piece LC port | External power adapter |
GQ-HDMI01V1A1R1DC-1.4 | 1 HDMI port (4K at 30 Hz) with loop-out; 1 forward 3.5 mm audio port with audio embedding and de-embedding; 1 reverse 3.5 mm audio port; 1 reverse IR port; and 1 bidirectional RS‑485 port. | 1 piece LC port | External power adapter |
| When placing an order, please confirm whether the optical port is multimode or single-mode, whether it uses a single fiber or dual fibers, and the transmission distance in kilometers. | |||
Application Diagram: Fiber Optic Point-to-Point Networking
Related Documents
Name
Size
Type
Release Date
Download
Beijing–Tianjin–Hebei, Henan, Shanxi, Inner Mongolia, and Sichuan:+8613719208595
Fujian, Guangxi, Hainan, Yunnan, Guizhou, and Jiangxi:+863760887412
Heilongjiang, Jilin, Liaoning, Inner Mongolia, Hunan, Chongqing:18126729399
Jiangsu, Zhejiang, Shanghai, Shandong, and Anhui:+8618198851696
Shaanxi, Gansu, Ningxia, Qinghai, Xinjiang, and Tibet:+8618198851697
Guangdong Region:+8613302232639 +8618903052902
3rd Floor, Elevator No. 1, Building B, Guangzheng Science and Technology Park, No. 11, Nanyun Fifth Road, Huangpu District, Guangzhou City