-
Product Center
-
-
-
Unmanaged Industrial Switches(Extended Temp)
Unmanaged Industrial Switch
L2 Managed Industrial Switches
L3 Managed Industrial Switches
TSN Industrial Switch
Managed Industrial PoE Switch
M12 Industrial Switch
Industrial 100-Mbps Transceiver
Industrial Gigabit Transceiver
Unmanaged Switch
L2 Managed Switches
Standard PoE Switches
Non-standard PoE Switches
Managed PoE Switch
Unmanaged Domestic Switches
Managed Domestic Switches
Unmanaged Waterproof Switches
Managed Waterproof Switches
100M Fiber Optic Transceivers
Gigabit Fiber Optic Transceivers
Fiber Optic Transceiver Chassis
Pure Telephone Optical Terminals
Telephone&Ethernet Optical Terminals
Integrated Service Telephone Optical Terminals
HDMI Video Optical Terminals
SDI Video Optical Terminals
VGA Video Optical Terminals
DVI Video Optical Terminals
3.5mm Interface Audio Optical Terminals
RCA Interface Audio Optical Terminals
XLR Interface Audio Optical Terminals
Commercial-grade Dry Contact Optical Terminals
Industrial-grade Dry Contact Optical Terminals
RS485 Date Optical Terminals
E1 Over IP
Voier Over IP
Pure E1 Optical Terminals
1+1 Fiber Back-up Optical Terminals
4~30 Channels PCM Multiplexers
Ethenet Over 1~16*E1 Converters
1~32 Serial Port Servers
Industrial 4G Routers
Industrial 5G Routers
2.4G/5.8G Wireless Bridge
Wireless AC Controller
Gigabit Optical Modules
Power Adapter
Rail-Mounted Power Supply
Fiber Optic Pigtail
Terminal Box
GQ5000-F12SC Series
100 Mbps 1‑fiber/2‑Ethernet fiber optic transceiver
Keywords
Commercial Switches
Domestic Switches
隐藏域元素占位
Category:
Commercial Switches
Domestic Switches
Product Overview
The GQ5000‑F12SC series fiber optic transceivers (also known as media converters) enable conversion between Ethernet electrical interfaces and optical interfaces. Each transceiver can be configured with two Ethernet electrical ports and one optical port, extending Ethernet transmission distances from 100 meters over copper cabling to up to 120 kilometers when using single-mode fiber. It facilitates straightforward interconnection among multiple motherboard servers, repeaters, hubs, and terminals, as well as between multiple terminal devices. Featuring a mature switching core, a variety of fiber optic interfaces, and support for hot-swapping, these transceivers offer flexibility, high efficiency, and robust reliability. They are ideally suited for high‑performance, highly reliable network environments in telecommunications, broadcasting, broadband networks, and high‑definition video surveillance applications.
Product Features
◆ Supports two 10/100M adaptive electrical ports and one 100M optical port (single-fiber or dual-fiber optional)
◆ Supports full-duplex IEEE 802.3x flow control and half-duplex backpressure flow control, with automatic negotiation for either half- or full-duplex mode.
◆ Multimode transmission distances can reach up to 2 kilometers, while single-mode transmission distances can extend as far as 120 kilometers.
◆ Features include broadcast storm protection, traffic balancing, collision isolation, and error detection.
◆ Employs high-performance switching chips and large-capacity buffers.
◆ High-quality laser components exhibit excellent optical performance, electrical characteristics, and thermal stability.
◆ The circuit layout is scientifically designed, with strong anti-interference capabilities, effectively protecting against lightning strikes.
◆ Comprehensive status indicator lights ensure that the operating status is immediately clear at a glance.
◆ External professional switching power supply, ensuring safety and stability; overall power consumption is less than 5 W.
◆ Built-in lightning protection circuitry, which can significantly reduce damage caused by lightning-induced surges.
| Protocol Standard | |
| Ethernet standard | IEEE 802.3 (Ethernet), IEEE 802.3u (100Base-TX and 100Base-FX), IEEE 802.3x (flow control) |
| Interface | |
| 100-Mbps optical port | Quantity: 1 piece Interface type: 1×9 fixed optical ports, supporting SC/FC/ST connectors (SC by default at factory) Interface speed: 100Base-FX |
| 100-Mbps electrical port | Quantity: 2 pieces Interface type: RJ45 electrical port Interface speed: 10/100 Mbps adaptive Ethernet port |
| Power connector | DC power connector (external power supply) |
| Transmission distance | |
| Twisted pair cable | 100 m (standard CAT5/CAT5e cable) |
| Optical fiber | Multimode fiber: 2 km; Single-mode fiber: 20/40/60/80/100/120 km |
| Indicator light | |
| Panel indicator light | PWR: On: Indicates that the power is on and supplying power normally. FDX: On: Indicates the optical port is operating in full-duplex mode; Off: Indicates it is operating in half-duplex mode. FDX1, FDX2: Lit—indicates that Ethernet is operating in full-duplex mode; unlit—indicates that it is operating in half-duplex mode. L/A: Solid: indicates the optical link is connected; Blinking: indicates data is being transmitted over the optical port. L/A1, L/A2: Solid: indicates the electrical link is connected; Blinking: indicates data is being transmitted over the electrical port. |
| Power Supply Characteristics | |
| Input voltage | AC 100–265 V to DC 5 V, 1 A (external power supply) |
| Full-load power consumption | <5W |
| Wiring method | DC power connector (external power supply) |
| Overload protection | Support |
| Work environment | |
| Operating temperature | -0～50℃ |
| Storage temperature | -40～70℃ |
| Relative humidity | 5% to 95% (non-condensing) |
| Mechanical Properties | |
| Shell | Metal casing |
| Installation Method | Desktop installation |
| Size | 94×70×26mm |
| Weight | 172g |
| Warranty | |
| Warranty period | Two years |
Device model | 100 Mbps, 1 optical port, 2 electrical ports | Desktop/Cassette | Power supply |
GQ5000-F12SC-2 | Multi-mode dual-fiber SC optical port, 2 km | Desktop | External power adapter |
GQ5000-F12SC-20 | Single-mode dual-fiber SC optical port, 20 km | Desktop | External power adapter |
GQ5000-F12SC-20A | Single-mode single-fiber SC optical port, 20 km, A-end | Desktop | External power adapter |
GQ5000-F12SC-20B | Single-mode single-fiber SC optical port, 20 km, B-end | Desktop | External power adapter |
| For the single model, “-20” denotes a transmission distance of 20 kilometers; longer transmission distances correspond to: -40, -60, -80, -100, and -120. | |||
Application Diagram 1: Fiber Optic Point-to-Point Networking
Application Diagram 2: Fiber Optic Point-to-Multipoint Networking
Related Documents
Name
Size
Type
Release Date
Download
Technical Specification (100 Mbps, One Fiber, Two Electrical Ports)
207.6KB
2025-07-30
Beijing–Tianjin–Hebei, Henan, Shanxi, Inner Mongolia, and Sichuan:+8613719208595
Fujian, Guangxi, Hainan, Yunnan, Guizhou, and Jiangxi:+863760887412
Heilongjiang, Jilin, Liaoning, Inner Mongolia, Hunan, Chongqing:18126729399
Jiangsu, Zhejiang, Shanghai, Shandong, and Anhui:+8618198851696
Shaanxi, Gansu, Ningxia, Qinghai, Xinjiang, and Tibet:+8618198851697
Guangdong Region:+8613302232639 +8618903052902
3rd Floor, Elevator No. 1, Building B, Guangzheng Science and Technology Park, No. 11, Nanyun Fifth Road, Huangpu District, Guangzhou City