100 Mbps 8-port industrial switch
100 Mbps 8-port industrial switch
100 Mbps 8-port industrial switch
100 Mbps 8-port industrial switch
+
  • 100 Mbps 8-port industrial switch
  • 100 Mbps 8-port industrial switch
  • 100 Mbps 8-port industrial switch
  • 100 Mbps 8-port industrial switch
undefined
undefined
undefined
undefined
+
  • undefined
  • undefined
  • undefined
  • undefined

Number:

1020

GQ-IES08A

100 Mbps 8-port industrial switch

1. Supports eight 10/100 Mbps auto‑negotiating electrical ports. 2. Supports full‑duplex and half‑duplex auto‑negotiation. 3. Complies with IEEE 802.3, 802.3u, and 802.3x store-and-forward modes. 4. Dual power supply with redundant DC 9–48 V input. 5. Wide operating temperature range: –40°C to +85°C. 6. Industrial‑grade design, fanless, with no cooling vents.

Keywords

Industrial Switches

Commercial Switches

Domestic Switches

隐藏域元素占位

Category:

Industrial Switches

Commercial Switches

Domestic Switches

Product Overview Technical Specifications Product Selection Application Solution Download Materials

Product Overview

The GQ-IES08A is an 8‑port industrial Ethernet switch, equipped with eight 10/100 Mbps industrial Ethernet ports. It is designed for industrial environments to interconnect multiple motherboard servers, repeaters, hubs, and terminal devices with numerous end terminals. The device features a high‑strength, corrugated‑surface heat‑dissipating enclosure that mounts on a DIN rail, dual redundant DC power inputs, an IP40 protection rating, and an extended operating temperature range of –40°C to +85°C, ensuring long‑term, stable, reliable, and safe operation in harsh conditions such as extreme temperatures, dust, and electromagnetic interference.

It is suitable for industrial control and automation applications that require high‑performance, highly reliable networking, including road traffic control automation, rail transit, power‑system automation, coal‑mine automation, wind energy and wind‑power systems, metallurgical steel plants, the oil and gas industry, building automation systems, oilfield control automation, hydropower‑station control automation, data‑center monitoring systems, water‑resources monitoring, environmental‑protection monitoring, and urban underground utility tunnels.

 

Product Features

◆ Supports eight 10/100M adaptive electrical ports, with auto-MDI/MDI‑X capability.

◆ Supports full-duplex and half-duplex auto-negotiation.

◆ All ports support wire-speed forwarding, ensuring non-blocking packet forwarding.

◆ Complies with IEEE 802.3/802.3u/802.3x store-and-forward mode.

◆ Dual-power DC 9–48 V redundant input

◆ Supports full-load operation across a temperature range of -40 to 85°C.

◆ High‑strength corrugated‑surface heat‑dissipating enclosure, rail‑mounting design, IP40 protection rating

◆ Low-power, fanless design

◆ The circuit board supports triple‑protection treatments—mold resistance, moisture resistance, and salt‑spray resistance (optional).

Protocol Standard
Ethernet standard IEEE 802.3 (Ethernet), IEEE 802.3u (100Base-TX and 100Base-FX)     
IEEE 802.3x (flow control)
Interface
100-Mbps electrical port Quantity: Pure 8 electrical ports;     
Interface type: RJ45 electrical port;     
Interface speed: 10/100 Mbps auto-negotiating Ethernet port;
Power connector 5.08 mm pitch plug-in terminal block
Transmission distance
Twisted pair cable 100 m (standard CAT5/CAT5e cable)
Exchange characteristics
Application Layer Second floor
Transmission method Store-and-forward
Backplane bandwidth  1Gbps
Packet forwarding rate 0.9 Mpps
MAC Address Table 1K, automatic learning
Power Supply Characteristics
Input voltage DC 9–48 V (dual power redundant input)
Full-load power consumption <5W
Wiring method 5.08 mm pitch plug-in terminal block
Overload protection Support
Reverse polarity protection Support
Work environment
Operating temperature -40~85℃
Storage temperature -40~85℃
Relative humidity 5% to 95% (non-condensing)
Mechanical Properties
Shell High‑performance corrugated‑surface heat sink (fanless design)
Protection Level IP40
Installation Method Standard 35mm DIN rail-mountable
Size Width × Height × Depth (mm): 34 × 146 × 102
Weight By actual weight
Industry Standard
EMI FCC CFR47 Part 15, EN55022/CISPR22, Class A
EMS EN61000-4-2 (ESD), Level 4 EN61000-4-3 (RS), Level 3     
EN61000-4-4 (EFT), Level 4 EN61000-4-5 (Surge), Level 4     
EN61000-4-6 (CS), Level 3 EN61000-4-8, Level 5
Impact GB/T 2423.5-1995
Free fall GB/T 2423.5-1995
Vibration GB/T 21563-2008/IEC 61373:1999
Warranty
Warranty period 3 years
Certification
Third-party certification There is

 

Appearance dimensions

Device model

100-Mbps electrical port

100 Mbps optical port

Optical Port Parameters

Power supply

GQ-IES08A

 8

0

--

Dual power supply (9–48 VDC)

For more models and specifications, please call us for inquiries!

 

Related Documents

Name

Size

Type

Release Date

Download

Technical Specification (Industrial Ethernet Switch, 100 Mbps, 8 Electrical Ports)

223.1KB

pdf

2025-07-10

Product Catalog (Industrial Switches)

184.5KB

pdf

2025-07-10

Leave a Message Online

Note: Please provide your contact information, and our specialists will get in touch with you as soon as possible!

Submit