-
Product Center
-
-
-
Unmanaged Industrial Switches(Extended Temp)
Unmanaged Industrial Switch
L2 Managed Industrial Switches
L3 Managed Industrial Switches
TSN Industrial Switch
Managed Industrial PoE Switch
M12 Industrial Switch
Industrial 100-Mbps Transceiver
Industrial Gigabit Transceiver
Unmanaged Switch
L2 Managed Switches
Standard PoE Switches
Non-standard PoE Switches
Managed PoE Switch
Unmanaged Domestic Switches
Managed Domestic Switches
Unmanaged Waterproof Switches
Managed Waterproof Switches
100M Fiber Optic Transceivers
Gigabit Fiber Optic Transceivers
Fiber Optic Transceiver Chassis
Pure Telephone Optical Terminals
Telephone&Ethernet Optical Terminals
Integrated Service Telephone Optical Terminals
HDMI Video Optical Terminals
SDI Video Optical Terminals
VGA Video Optical Terminals
DVI Video Optical Terminals
3.5mm Interface Audio Optical Terminals
RCA Interface Audio Optical Terminals
XLR Interface Audio Optical Terminals
Commercial-grade Dry Contact Optical Terminals
Industrial-grade Dry Contact Optical Terminals
RS485 Date Optical Terminals
E1 Over IP
Voier Over IP
Pure E1 Optical Terminals
1+1 Fiber Back-up Optical Terminals
4~30 Channels PCM Multiplexers
Ethenet Over 1~16*E1 Converters
1~32 Serial Port Servers
Industrial 4G Routers
Industrial 5G Routers
2.4G/5.8G Wireless Bridge
Wireless AC Controller
Gigabit Optical Modules
Power Adapter
Rail-Mounted Power Supply
Fiber Optic Pigtail
Terminal Box
GQ-IES2613 Series
100 Mbps industrial switch with 2 optical and 6 electrical ports
Keywords
Industrial Switches
Commercial Switches
Domestic Switches
隐藏域元素占位
Category:
Industrial Switches
Commercial Switches
Domestic Switches
Product Overview
The GQ-IES2613 series is an Ethernet media converter that bridges electrical and optical interfaces, featuring six 10/100 Mbps Ethernet ports and two fixed Gigabit optical ports. It enables interconnection among multiple motherboard servers, repeaters, hubs, and terminal devices in industrial environments, extending Ethernet transmission distances from 100 meters over copper cabling to 2 kilometers (multimode fiber) or 120 kilometers (single-mode fiber). The device is housed in a rugged, DIN‑rail‑mountable enclosure with a high‑strength corrugated heat‑dissipation surface, supports dual redundant DC power inputs, offers an IP40 protection rating, and operates within a wide temperature range of –40°C to +85°C, ensuring long‑term stable, reliable, and safe performance even under harsh conditions such as extreme temperatures, dust, and electromagnetic interference.
It is suitable for industrial control automation applications such as road traffic management, rail transit, power automation, coal‑mine automation, wind energy and wind power, metallurgical steel plants, oil and gas, building automation systems, oilfield control automation, hydropower plant control automation, data‑center monitoring systems, water‑resources monitoring, environmental protection monitoring, urban underground utility tunnels, and other industrial settings that require high‑performance, highly reliable network environments.
Product Features
◆ Supports two 100-Mbps optical ports and six 100-Mbps electrical ports; ports support auto‑MDI/MDI‑X.
◆ Supports full-duplex and half-duplex auto-negotiation.
◆ All ports support wire-speed forwarding, ensuring non-blocking packet forwarding.
◆ Complies with IEEE 802.3/802.3u/802.3x store-and-forward mode.
◆ Dual-power DC 9–36 V redundant input
◆ Supports full-load operation across a temperature range of -40 to 85°C.
◆ High‑strength corrugated‑surface heat‑dissipating enclosure, rail‑mounting design, IP40 protection rating
◆ Low-power, fanless design
◆ The circuit board supports triple‑protection treatments—mold resistance, moisture resistance, and salt‑spray resistance (optional).
| Protocol Standard | |
| Ethernet standard | IEEE 802.3 (Ethernet), IEEE 802.3u (100Base-TX and 100Base-FX) IEEE 802.3x (flow control) |
| Interface | |
| 100-Mbps optical port | Quantity: 2; Interface type: Fixed optical interface (SC by default); Interface speed: 100Base-FX; |
| 100-Mbps electrical port | Quantity: 6 pieces; Interface type: RJ45 electrical port; Interface speed: 10/100 Mbps auto-negotiating Ethernet port; |
| Power connector | 5.08 mm pitch plug-in terminal block |
| Transmission distance | |
| Twisted pair cable | 100 m (standard CAT5/CAT5e cable) |
| Optical fiber | Multimode fiber: 2 km; Single-mode fiber: 20/40/60/80/100/120 km; |
| Exchange characteristics | |
| Application Layer | Second floor |
| Transmission method | Store-and-forward |
| Backplane bandwidth | 19.6 Gbps |
| Packet forwarding rate | 4.2 Mpps |
| MAC Address Table | 4K, automatic learning |
| Power Supply Characteristics | |
| Input voltage | DC 9–36 V (dual power redundant input) |
| Full-load power consumption | <5W |
| Wiring method | 5.08 mm pitch plug-in terminal block |
| Overload protection | Support |
| Reverse polarity protection | Support |
| Work environment | |
| Operating temperature | -40～85℃ |
| Storage temperature | -40～85℃ |
| Relative humidity | 5% to 95% (non-condensing) |
| Mechanical Properties | |
| Shell | High‑performance corrugated‑surface heat sink (fanless design) |
| Protection Level | IP40 |
| Installation Method | Standard 35mm DIN rail-mountable |
| Size | Width × Height × Depth (mm): 58 × 189 × 128 |
| Weight | By actual weight |
| Industry Standard | |
| EMI | FCC CFR47 Part 15, EN55022/CISPR22, Class A |
| EMS | EN61000-4-2 (ESD), Level 4 EN61000-4-3 (RS), Level 3 EN61000-4-4 (EFT), Level 4 EN61000-4-5 (Surge), Level 4 EN61000-4-6 (CS), Level 3 EN61000-4-8, Level 5 |
| Impact | GB/T 2423.5-1995 |
| Free fall | GB/T 2423.5-1995 |
| Vibration | GB/T 21563-2008 / IEC 61373:1999 |
| Warranty | |
| Warranty period | 3 years |
| Certification | |
| Third-party certification | There is |
Appearance dimensions
|
Device model |
100-megabit electrical port |
100 Mbps optical port |
Optical Port Parameters |
Power supply |
|
GQ-IES2613-SC20 |
6 |
2 |
Single-mode, dual-fiber SC interface, 20 km, 1310 nm |
Dual power supply (9–36 VDC) |
|
GQ-IES2613-SC20AB |
6 |
2 |
Single-mode single-fiber SC interface, 20 km, 1310 nm, 1550 nm |
Dual power supply (9–36 VDC) |
|
For more models and specifications, please call us for inquiries! |
||||
Related Documents
Name
Size
Type
Release Date
Download
Technical Specification (Industrial Ethernet Switch, 100 Mbps, 2 Fiber Ports, 6 Electrical Ports)
324.8KB
2025-07-12
Beijing–Tianjin–Hebei, Henan, Shanxi, Inner Mongolia, and Sichuan:+8613719208595
Fujian, Guangxi, Hainan, Yunnan, Guizhou, and Jiangxi:+863760887412
Heilongjiang, Jilin, Liaoning, Inner Mongolia, Hunan, Chongqing:18126729399
Jiangsu, Zhejiang, Shanghai, Shandong, and Anhui:+8618198851696
Shaanxi, Gansu, Ningxia, Qinghai, Xinjiang, and Tibet:+8618198851697
Guangdong Region:+8613302232639 +8618903052902
3rd Floor, Elevator No. 1, Building B, Guangzheng Science and Technology Park, No. 11, Nanyun Fifth Road, Huangpu District, Guangzhou City