Gigabit 28-port industrial switch
Gigabit 28-port industrial switch
Gigabit 28-port industrial switch
+
  • Gigabit 28-port industrial switch
  • Gigabit 28-port industrial switch
  • Gigabit 28-port industrial switch
undefined
undefined
undefined
+
  • undefined
  • undefined
  • undefined

Number:

1510

GQ-IESM4G24GE

Gigabit 28-port industrial switch

1. Supports four Gigabit SFP optical ports and twenty-four Gigabit electrical ports. 2. Supports 802.1x authentication, VLANs, and broadcast storm suppression. 3. Features a web-based graphical user interface and supports SNMP for device management. 4. Input voltage: AC 220V. 5. Wide operating temperature range: -20°C to +70°C. 6. Industrial-grade design, fanless, with no cooling vents.

Keywords

Commercial Switches

Domestic Switches

隐藏域元素占位

Category:

Commercial Switches

Domestic Switches

Product Overview Technical Specifications Product Selection Application Solution Download Materials

Product Overview

The GQ-IESM4G24GE is a managed Layer 2 industrial Ethernet switch, equipped with four Gigabit SFP optical ports and twenty-four Gigabit electrical ports. This series supports configuration and management via a web interface. The device features a 19-inch, 1U heat‑dissipating chassis and operates over a wide temperature range of –20°C to +70°C, ensuring long‑term, stable, reliable, and secure performance in harsh environments—including high and low temperatures, dust, and electromagnetic interference.

The product supports a wide range of network management features, including web‑based, CLI‑based, and SNMP‑based interfaces and management methods. It also provides port‑based VLANs, 802.1Q‑based VLANs, QoS, IGMP snooping, RSTP, broadcast storm suppression, link aggregation, port mirroring, port status management, SNMP, NTP automatic time synchronization, and more.

It is suitable for industrial automation applications such as road traffic control, rail transit, power automation, coal‑mine automation, wind energy and wind power, metallurgical steel plants, oil and natural gas, building automation systems, oilfield automation, hydropower plant automation, data‑center monitoring, water‑resources monitoring, environmental‑protection monitoring, and other industrial‑control environments that demand high performance and high reliability.

 

Product Features

◆ Supports 24 adaptive 10/100/1000 Mbps electrical ports and 4 Gigabit SFP optical ports; ports support auto-MDI/MDI‑X.

◆ Supports full-duplex and half-duplex auto-negotiation.

◆ All ports support wire-speed forwarding, ensuring non-blocking packet forwarding.

◆ Supports 802.1x authentication and broadcast storm suppression.

◆ Supports loop detection and port + IP + MAC binding.

◆ Supports real-time port traffic monitoring and anomaly alerts.

◆ Supports a web-based visual interface and SNMP-based device management.

◆ AC 220V power supply

◆ Supports full-load operation across a temperature range of -20 to 70°C.

◆ Rack-mountable, IP40 protection rating

◆ The circuit board supports triple‑protection treatments—mold resistance, moisture resistance, and salt‑spray resistance (optional).

Protocol Standard
Ethernet Standard

IEEE 802.3 (Ethernet), IEEE 802.3u (100Base-TX and 100Base-FX)           
IEEE 802.3z (1000Base-TX and 1000Base-X), IEEE 802.3x (flow control)

IEEE 802.1D (STP), IEEE 802.1w (RSTP), IEEE 802.1Q (VLAN),   
  IEEE 802.1p (priority), IEEE 802.1x (access control)

Interface
Gigabit optical port Quantity: 4;           
Interface type: SFP interface (requires an SFP optical module);           
Interface speed: 1000Base-X;
Gigabit electrical port Quantity: 24 pieces;           
Interface type: RJ45 electrical port;           
Interface speed: 10/100/1000 Mbps adaptive Ethernet port;
Power connector AC 220V: National standard three-pin plug; DC 48V: Industrial terminal;
Transmission distance
Twisted pair cable 100 m (standard CAT5/CAT5e cable)
Fiber optic cable Multimode fiber: 550 m; Single-mode fiber: 20/40/60/80/100 km;
Exchange characteristics
Application Layer Second floor
Transmission method Store-and-forward
Backplane bandwidth  256Gbps
Packet forwarding rate  96Mpps
MAC Address Table 16K, automatic learning
Data cache area  512KB
Priority queue  4
Number of VLANs 1–4096
Number of multicast groups  256
Power Supply Characteristics
Input voltage AC 220V or DC 48V
Full-load power consumption <200,000
Wiring Method AC 220V: National standard three-pin plug; DC 48V: Industrial terminal block
Overload protection Support
Work environment
Operating temperature -20~70℃
Storage temperature -40~85℃
Relative humidity 5% to 95% (non-condensing)
Mechanical Properties
Shell Metal casing
Protection Level IP40
Installation Method 1U rack-mount installation
Size Length × Width × Height (mm): 480 × 310 × 44
Weight By actual weight
Industry Standard
EMI FCC CFR47 Part 15, EN55022/CISPR22, Class A
EMS EN61000-4-2 (ESD), Level 4 EN61000-4-3 (RS), Level 3           
EN61000-4-4 (EFT), Level 4 EN61000-4-5 (Surge), Level 4           
EN61000-4-6 (CS), Level 3 EN61000-4-8, Level 5
Impact GB/T 2423.5-1995
Free fall GB/T 2423.5-1995
Vibration GB/T 21563-2008 / IEC 61373:1999
Warranty
Warranty period 3 years
Certification
Third-party certification There is

 

Appearance dimensions

 

 

 

Device model

Number of application layers

Gigabit electrical port

Gigabit optical port

Optical Port Parameters

Power supply

GQ-IESM4G24GE

Layer 2 Managed

24

4

SFP optical port, determined by the optical module’s specifications.

AC 220V power supply

For more models and specifications, please call us for inquiries!

Related Documents

Name

Size

Type

Release Date

Download

Technical Specification (Industrial Managed Gigabit Switch, 4 Fiber Ports, 24 Ethernet Ports)

197.2KB

pdf

2025-07-30

Product Catalog (Industrial Switches)

184.5KB

pdf

2025-07-10

Leave a Message Online

Note: Please provide your contact information, and our specialists will get in touch with you as soon as possible!

Submit