Gigabit 8‑fiber/1‑Ethernet fiber optic transceiver
Gigabit 8‑fiber/1‑Ethernet fiber optic transceiver
Gigabit 8‑fiber/1‑Ethernet fiber optic transceiver
+
  • Gigabit 8‑fiber/1‑Ethernet fiber optic transceiver
  • Gigabit 8‑fiber/1‑Ethernet fiber optic transceiver
  • Gigabit 8‑fiber/1‑Ethernet fiber optic transceiver
undefined
undefined
undefined
+
  • undefined
  • undefined
  • undefined

Number:

5085

GQ5000-G81-SFP Series

Gigabit 8‑fiber/1‑Ethernet fiber optic transceiver

1. 10M/100M/1000M auto‑negotiation. 2. Multimode transmission distance up to 550 meters. 3. Single-mode transmission distance up to 80 kilometers. 4. Supports full‑duplex IEEE 802.3x flow control and half‑duplex backpressure flow control. 5. Features broadcast storm protection, traffic balancing, and collision isolation.

Keywords

Commercial Switches

Domestic Switches

隐藏域元素占位

Category:

Commercial Switches

Domestic Switches

Product Overview Technical Specifications Product Selection Application Solution Download Materials

Product Overview

The GQ5000‑G81‑SFP series fiber optic transceivers (also known as fiber optic switches) convert between Ethernet electrical and optical interfaces. Each switch is configurable with one Gigabit Ethernet electrical port and eight Gigabit SFP (Mini GBIC) ports, allowing the eight optical ports to connect to eight remote fiber optic transceivers for point‑to‑multipoint networking. It extends Ethernet transmission distances from 100 meters over copper cabling to 550 meters (multimode fiber) or 80 kilometers (single‑mode fiber). The device enables straightforward interconnection among multiple host servers, repeaters, hubs, and terminals. Featuring a mature switching core, a variety of fiber optic interfaces, and support for hot swapping, it offers flexibility, efficiency, and reliability. It is ideally suited for high‑performance, high‑reliability network environments such as telecommunications, broadcasting, broadband networks, and high‑definition video surveillance systems.

 

Product Features

◆ Supports one 10/100/1000M adaptive electrical port and eight Gigabit SFP optical ports (single-mode/dual-mode optional)

◆ Supports full-duplex IEEE 802.3x flow control and half-duplex backpressure flow control, with auto-negotiation for either half- or full-duplex mode.

◆ Multimode transmission distance can reach up to 550 meters, while single-mode transmission distance can extend as far as 80 kilometers.

◆ Features include broadcast storm protection, traffic balancing, collision isolation, and error detection.

◆ Employs high-performance switching chips and large-capacity buffers.

◆ High-quality laser components exhibit excellent optical performance, electrical characteristics, and thermal stability.

◆ The circuit layout is scientifically designed, with strong anti-interference capabilities, effectively protecting against lightning strikes.

◆ Comprehensive status indicator lights ensure that the operating status is immediately clear at a glance.

◆ External professional switching power supply, ensuring safety and stability; overall power consumption is less than 5 W.

◆ Built-in lightning protection circuitry, which can significantly reduce damage caused by lightning-induced surges.

Protocol Standard
Ethernet standard IEEE 802.3 (Ethernet), IEEE 802.3u (100Base-TX and 100Base-FX), IEEE 802.3z (1000Base-TX and 1000Base-X), IEEE 802.3x (flow control)
Interface
Gigabit optical port Quantity: 8 pieces
Interface type: SFP optical port, supports single-fiber/dual-fiber, LC connector
Interface speed: 1000Base-FX
Gigabit electrical port Quantity: 1 piece
Interface type: RJ45 electrical port
Interface speed: 10/100/1000 Mbps adaptive Ethernet port
Power connector DC power connector (external power supply)
Transmission distance
Twisted pair cable 100 m (standard CAT5/CAT5e cable)
Optical fiber Multimode fiber: 550 m; Single-mode fiber: 20/40/60/80 km
Indicator light
Panel indicator light

PWR: On: Indicates that the power is on and supplying power normally.

G1–G8: On: Indicates that the optical port is connected normally.

SPD: On: Indicates the electrical port is operating in 1000 Mbps mode.

LNK/ACT: Solid: Indicates a normal electrical port connection; Blinking: Indicates data transmission on the electrical port.

Power Supply Characteristics
Input voltage AC 100–265 V to DC 5 V, 1 A (external power supply)
Full-load power consumption <5W
Wiring Method DC power connector (external power supply)
Overload protection Support
Work environment
Operating temperature -0~50℃
Storage temperature -40~70℃
Relative humidity 5% to 95% (non-condensing)
Mechanical Properties
Shell Metal casing
Installation Method Desktop installation
Size 223×128×30mm
Weight  500g
Warranty
Warranty period Two years

Device model

Gigabit 8 optical 1 electrical

Desktop/Cassette

Power supply

GQ5000-G81-SFP

SFP optical port (optical module sold separately)

Desktop

External power adapter

Optical modules are available in single-mode or multi-mode, and in single-fiber or dual-fiber configurations.

 

Application Diagram: Fiber Optic 1-to-8 Network Configuration

Related Documents

Name

Size

Type

Release Date

Download

Technical Specification (Gigabit Ethernet with Fiber and Copper Ports)

217.0KB

pdf

2025-07-30

Fiber Optic Transceiver Product Catalog

163.4KB

pdf

2025-06-28

Leave a Message Online

Note: Please provide your contact information, and our specialists will get in touch with you as soon as possible!

Submit