-
Product Center
-
-
-
Unmanaged Industrial Switches(Extended Temp)
Unmanaged Industrial Switch
L2 Managed Industrial Switches
L3 Managed Industrial Switches
TSN Industrial Switch
Managed Industrial PoE Switch
M12 Industrial Switch
Industrial 100-Mbps Transceiver
Industrial Gigabit Transceiver
Unmanaged Switch
L2 Managed Switches
Standard PoE Switches
Non-standard PoE Switches
Managed PoE Switch
Unmanaged Domestic Switches
Managed Domestic Switches
Unmanaged Waterproof Switches
Managed Waterproof Switches
100M Fiber Optic Transceivers
Gigabit Fiber Optic Transceivers
Fiber Optic Transceiver Chassis
Pure Telephone Optical Terminals
Telephone&Ethernet Optical Terminals
Integrated Service Telephone Optical Terminals
HDMI Video Optical Terminals
SDI Video Optical Terminals
VGA Video Optical Terminals
DVI Video Optical Terminals
3.5mm Interface Audio Optical Terminals
RCA Interface Audio Optical Terminals
XLR Interface Audio Optical Terminals
Commercial-grade Dry Contact Optical Terminals
Industrial-grade Dry Contact Optical Terminals
RS485 Date Optical Terminals
E1 Over IP
Voier Over IP
Pure E1 Optical Terminals
1+1 Fiber Back-up Optical Terminals
4~30 Channels PCM Multiplexers
Ethenet Over 1~16*E1 Converters
1~32 Serial Port Servers
Industrial 4G Routers
Industrial 5G Routers
2.4G/5.8G Wireless Bridge
Wireless AC Controller
Gigabit Optical Modules
Power Adapter
Rail-Mounted Power Supply
Fiber Optic Pigtail
Terminal Box
GQ-MOIP16
TDMoIP Ethernet transmission of 16 E1 channels
Keywords
Commercial Switches
Domestic Switches
隐藏域元素占位
Category:
Commercial Switches
Domestic Switches
Product Overview
TDMoverIP devices are primarily used to transmit E1 signals over IP networks. They enable carriers and enterprises to seamlessly and reliably interconnect TDM equipment with user Ethernet over a standard, low-cost wireless or wired Ethernet/IP infrastructure—without any degradation in service quality. TDM over IP is transparent to TDM signals, ensuring seamless connectivity for any device equipped with a physical E1 interface, such as PBXs, mobile base stations, SS7 signaling equipment, and voicemail systems. It can be deployed in IP‑based communication systems, including LANs, WANs, MANs, and wireless networks.
It features 16 E1 service ports, 2 Gigabit Ethernet electrical ports, 1 Gigabit Ethernet optical port, and a console management interface.
Product Features
1. Provides both a console (CLI) and a web-based management interface for easy installation and deployment.
2. Provides 16 E1 circuits, 2 Gigabit Ethernet electrical ports, and 1 Gigabit Ethernet SFP optical port.
3. The E1 interface supports both 75-ohm and 120-ohm types without requiring any configuration.
4. It supports transparent transmission of non-framed and framed E1 (N×64 kbps) signals over IP networks, in compliance with the relevant provisions of G.703.
5. Clock recovery employs a proprietary clock‑algorithm technology, ensuring stable frequency restoration with low jitter and drift; moreover, the recovered clock’s jitter and drift comply with the G.823/G.824 and G.8261 standards.
6. High transmission efficiency and low latency; Ethernet packet length is configurable, supporting long packets; VLAN configuration is supported.
7. Supports E1 link packet-loss indication.
8. Supports local and remote E1 loopback functionality, as well as local E1 enablement settings.
9. High transmission efficiency, with bandwidth utilization rates of up to 90%.
| Interface Parameters | |
| E1 interface | Equipment interface: Compliant with Recommendation G.703 Bitrate: 2048 Kb/s ± 50 ppm Code Type: HDB3 Impedance: 75 Ω (unbalanced) or 120 Ω (balanced); the unbalanced connector is BNC, compatible with 75‑2/3 coaxial cable. Jitter Characteristics: Complies with Recommendations G.742 and G.823. Input port attenuation range: 0 to 6 dBm |
| Ethernet interface | Protocol: Compliant with IEEE 802.3/802.3z and IEEE 802.1Q (VLAN) Speed: 10/100/1000 Mbps adaptive, full/half-duplex fully adaptive. MAC Address Table: Can learn up to 8K MAC addresses. Physical interface: RJ45 port, supports Auto-MDIX (auto‑detects crossover or straight‑through cables) |
| Power Supply Characteristics | |
| Input voltage | AC 220V or DC -48V |
| Full-load power consumption | <5W |
| Wiring method | AC 220V: National standard three-pin plug DC-48V: Power supply terminals |
| Overload protection | Support |
| Work environment | |
| Operating temperature | -10～60℃ |
| Storage temperature | -40～85℃ |
| Relative humidity | 5% to 95% (non-condensing) |
| Mechanical Properties | |
| Shell | Metal casing |
| Installation Method | Desktop installation |
| Size | 200 mm (depth) × 485 mm (width) × 45 mm (height) |
| Warranty | |
| Warranty period | Two years |
Device model | E1 interface | Ethernet interface | Power supply |
GQ-MOIP16-A | Route 16 E1 | Two Gigabit Ethernet ports and one Gigabit Ethernet optical port | Single power supply AC 220V |
GQ-MOIP16-D | Route 16 E1 | Two Gigabit Ethernet ports and one Gigabit Ethernet optical port | Single-supply DC-48V |
| When placing your order, please confirm whether you require an AC 220 V power supply or a DC –48 V power supply. | |||
Application Diagram: Peer-to-Peer Networking
Related Documents
Name
Size
Type
Release Date
Download
Beijing–Tianjin–Hebei, Henan, Shanxi, Inner Mongolia, and Sichuan:+8613719208595
Fujian, Guangxi, Hainan, Yunnan, Guizhou, and Jiangxi:+863760887412
Heilongjiang, Jilin, Liaoning, Inner Mongolia, Hunan, Chongqing:18126729399
Jiangsu, Zhejiang, Shanghai, Shandong, and Anhui:+8618198851696
Shaanxi, Gansu, Ningxia, Qinghai, Xinjiang, and Tibet:+8618198851697
Guangdong Region:+8613302232639 +8618903052902
3rd Floor, Elevator No. 1, Building B, Guangzheng Science and Technology Park, No. 11, Nanyun Fifth Road, Huangpu District, Guangzhou City